MechanixCalc
Professional mechanical engineering calculations — all domains, one suite.
AI engineering assistant —
built into your calculators.
Not a generic chatbot. The assistant sees your exact design — your numbers, your material, your results — and gives advice grounded in the standard.
- "Why is my SF 1.2?" — it already knows your Von Mises, Sy, and fatigue limit.
- Cites ISO 281, ISO 6336, VDI 2230 — whichever standard governs your tool.
- Available across the calculator suite. Shaft, bearings, gears, fatigue, fluid systems.
Why is SF so low?
Von Mises is 387 MPa against Sy 900 MPa — that's fine. The issue is the Goodman fatigue limit: Se = 193 MPa with σm = 35 MPa and σa = 165 MPa gives nG = 1.2. Increase seg 2 to Ø70 mm → nG ≈ 1.8.
What material would help?
The MechanixCalc Copilot —
your calculators, inside CAD.
A chat copilot in Fusion 360 that reads the geometry you select, asks for the loads CAD can't know, and runs every number through the validated engines — numbers-only, your model never leaves your machine.
- Reads your Fusion selection — faces, parameters, mass — as numbers, never your file.
- Runs the same standards-cited engines behind all 50 calculators, server-side.
- Numbers-only data flow — your CAD model stays on your machine.
Will this pin hold 12 kN?
Steady load, bronze bush? Running the bearing engine…
22.61 MPa vs 25.0 · SF 1.11× · thin margin
Drag-and-drop hydraulic & pneumatic circuits. ISO 1219-1 symbols, multi-sheet, cloud save & share links.
Piping & instrumentation diagrams per ISA 5.1. Instrument lists, line designation tables, print-ready A3.
IEC 60617 control diagrams with rung numbers. Motor & terminal lists, wire tables, share links.
No recent tools
Start calculating and they'll appear here
Browse 50 engineering calculators by domain or search by keyword
Input your design values with live unit conversion and real-time validation
Get instant engineering results with safety factor analysis and charts
Download full PDF reports with branding for client deliverables